Radio Shack 43-3817 - Manual (Page 21)

Te
lephon
e Op
eration
21
&KCNKPI"C"/GOQT["0WODGT
1. Lift the handset and press MEM to dial a stored
memory number. The list of memory location
numbers appears.
2. Choose a memory location ( 0 – 9 ) by pressing a
number or by repeatedly pressing 8 8 8 8 or 9 ,
then press TALK/FLASH .
You can also dial a memory number after pressing
TALK/FLASH . Press MEM (the display does not
change), then enter a memory location number.
%JCKP/&KCNKPI"5GTXKEG"0WODGTU
To quickly recall numbers for special services (such
as bank-by-phone), store each group of numbers in
its own memory location.
1. Dial the service’s main number.
2. When the next number is requested, press
MEM and enter the number for the location
where the additional information is stored.
6GUVKPI"5VQTGF"'OGTIGPE["0WODGTU
If you store an emergency service’s number (police
department, fire department, ambulance) and you
choose to test the stored number, make the test call
during the late evening or early morning hours to
avoid peak demand periods. Also, remain on the
line to explain the reason for your call.
1
0'
/6
17%*
"5
2''&
"&
+#.
You can store one frequently-used number in the
one-touch speed dial. (You do not need to press
TALK/FLASH ; the phone automatically dials the
number.) ±ý
±
"016'"
±
"
The speed dial memory
location is independent
from the standard memory
locations.