Radio Shack 43-3817 - Manual (Page 23)

Caller ID Opera
tion
23
%#..'4"+&"12'4#6+10
If you subscribe to Caller ID service from your
phone company, the phone company sends
information about the call, as well as the time and
date, between the first and second rings of every
call you receive.
The phone displays this information after the
second ring, and it stores up to 30 Caller ID records
for later review. It also shows if caller information is
unavailable or if the name and number were
blocked by the caller (see “Caller ID Messages” on
Page 24).
If the phone’s Caller ID memory becomes full, any
new call replaces the oldest call record.
If you subscribe to Call Waiting and Caller ID, you
will hear a tone through the handset when a call
comes in, then the Caller ID record appears. If you
want to answer the incoming call, press
TALK/
FLASH . To resume the previous phone
conversation, press TALK/FLASH again.
4
'8+'9+0)
"%
#..'4
"+&"4
'%14&5
To review the Caller ID records, lift the handset and
press
CID/MENU . The number of new Caller ID
records, if any, and the total number of records
appear.
±ý
Repeatedly press
9
to scroll through the Caller ID
records from the most recent to the oldest, or 8 to
scroll back through the records. To scroll quickly
through the records, hold down
8 or 9 .
When you scroll past the last record, the total
record number appears, then the first record. When
you scroll past the first record, the total record
number appears, then the last record.
The top line of each record shows the date, time
and the number of calls from that number (the first
±
"016'"
±
"
If the handset is face-up on
the base, it shows the
number of Caller ID
records, so you can see if
you have new records to
review.