Regency E21-NG2 - Manual (Page 11)

11 Regency ® E21-2 Gas Fireplace Insert
Note: Do not operate unit if fl ue connector is not
fastened in original position.
FLUE CONNECTOR INSTALLATION
1) Remove the screw holding the fl ue connector
plate to the appliance.
2) Slide the plate out and attach to the fl ue liner
inside the fi replace to the fl ue collar with three
sheet metal screws.
3) Place the appliance on the hearth. Push
the appliance into the fi replace and at the
same time slide the plate back onto the ap-
pliance.
4) Replace the screw holding the plate just
before completely pushing the appliance into
the fi replace.
INSTALLATION
For PROPANE Units and Units Equipped with DC Spark Boxes*
*For installation of the DC Spark Box refer to the LP Conversion instructions in this manual.