Connections & setup, Plug in the tv, Put batteries in the remote – RCA Scenium D44LPW134 User Manual
Page 21: Turn on the tv, Complete the initial setup, Set the menu language
Connections & Setup
Chapter 1
19
Plug in the TV
Plug the flat end of the cable into the power jack on the back of the TV. Then plug
the other end of the power cord into an appropriate wall outlet. Be sure to insert
the plug completely. Do not plug the TV into an outlet controlled by a light switch.
Put batteries in the remote
• Remove the battery compartment cover from the back of the remote by
pushing the tab and lifting off the cover.
• Insert 2 “AA” fresh batteries. Make sure the polarities (+ and -) are aligned
correctly.
• Replace the cover.
How to Use the Remote Control to
Complete the Initial Setup
The technical term is “Navigation” – how you move through the on-screen menus.
The theory is the same throughout the menu screens: highlight your choice and
select it.
To highlight a menu item, press the arrow buttons on the remote to highlight one
of the items listed on the screen. Use the up or down arrow button to move up or
down. Use the right or left arrow button to move right or left.
To select the item that you’ve highlighted, press OK.
Note: Highlighted means that the menu item stands out from other menu
items on the list (appears darker, brighter, or a different color).
Turn on the TV
Press TV on the remote, or press the Power button on the TV’s front panel.
Note: Pressing the TV button turns on the TV and puts the remote into TV
mode. “TV mode” means that the buttons on the remote control operate the
TV’s functions.
Complete the Initial Setup
The menu system in your TV allows the TV’s features to work properly. The first
time you turn on your TV, the setup screens appear.
Set the Menu Language
The first part of the setup allows you to select your preferred language for the
menu system.
If English is your preferred language, press OK. If you want to choose another
language, press the down arrow button until that language is highlighted, and
press OK.
TV button
Arrows
OK
button
Tip
To access the setup menus manually, press
MENU and choose SETUP.
Continues on next page...