RCA Scenium D44LPW134 - Manual (Page 52)

50 Chapter 4
Using the TV’s Menu System
Preferences
Language Displays a choice list that lets you select your preferred language
for the menus: English, Español or Français.
Maximum TV volume Allows you to set how high volume turns up when
you press the VOL+ button. Highlight Maximum volume, then press and
hold OK to hear the maximum volume. Make sure the volume has not been
muted or turned down all the way.
Curtain effect Reveals the picture by "opening" it from the middle of the
screen when the TV is switched on. Hides the picture by "closing" it from the
sides when the TV is switched off.
Special features The Auto on setting switches your TV on after a power
outage; Auto channel tunes the TV to the channel you specify as the Initial
channel when Auto on is enabled; Auto volume tunes the TV to the volume
you set in Initial volume when Auto on is enabled.
Short-term vs. Long-term
Power Outages
The Auto channel and Auto volume settings
don’t take effect after short-term power
outages (usually less than two to three
minutes). The TV will turn back on at the
same volume and channel as before the
power outage.
The Auto channel and Auto volume settings
take effect after power outages of several
minutes or more.
Closed Caption Many programs are encoded with closed-captioning
information, which lets you display the audio portion of a program as text on the
TV screen.
Closed captioning is not available on all channels at all times. Only specific
programs encoded with closed-captioning information. When a program is
closed captioned, CC is displayed in the channel banner. See Chapter 3 for more
information about the channel banner. The closed caption options are:
Closed caption setting Lets you choose the way closed captioning
information appears on the screen. The Closed caption setting does not effect
the DVI-HDTV input.
Off No captioning information displayed.
On always Captioning information shown always, when available.
On when mute Displays captioning information, when available,
whenever the TV’s sound is muted by pressing the MUTE button. The
captioning information is not displayed when the sound is not muted.
Closed-Caption Mode Displays a choice list that lets you choose which
captioning mode is used for displaying captioning information. If you are
unsure of the differences among the modes, you may prefer to leave the
closed captioned mode set to CC1, which displays complete text of the
program in the primary language in your area.
Autotuning Displays a choice list that lets you set up the TV to automatically
tune to the correct input channel when you press a component button (VCR,
DVD, AUX/HD or SAT/CABLE) on the remote. Go to Chapter 3 for details about
the Autotuning feature.