Roland TD-10 - Manual (Page 37)

TD-10 operating procedure
This section explains basic operation of the TD-10. Please try out each of these procedures.
■ Adjusting the volume
Adjusting the volume balance
For the kick drum, snare drum and hi-hat, use the [GROUP FADERS] sliders to adjust the volume.
Tom and cymbal, etc. are all adjusted as a group by [OTHERS].
Volume adjustments for each pad of the kit are made by the Control Room settings (p. 90).
fig.00-034
Adjusting the overall volume
Use [VOLUME CONTROL] to adjust the volume of the TD-10’s MASTER output jacks. Rotating it
clockwise increases volume, and rotating it counterclockwise decreases volume.
fig.00-035
[MASTER]: Adjusts the volume output from the MASTER OUT jacks.
[PHONES]: Adjusts the volume output from the headphone jack.
[MIX IN]: Adjusts the volume that is input from the MIX IN jack.
The input from MIX IN is output from the MASTER jacks and the PHONES jack (alter-
natively, only from the PHONES jack).
For a better performance
37
Quick Star
t