Roland TD-10 - Manual (Page 90)

The most important aspect of finalizing the sound in record-
ing or live performances depends on the mixing console. In
the Control Room, you’ll find a complete 12-channel mixer
with 10 individual compressors and EQ’s and digital effects,
finalizing your sound in a CD-quality state.
Abbreviations in the display screen
TRIGGER INPUT jacks
K=Kick
Sn=Snare
T1=Tom 1
T2=Tom 2
T3=Tom 3
T4=Tom 4
HH=Hi-hat
C1=Crash 1
C2=Crash 2
Rd=Ride cymbal
A1=AUX1
A2=AUX2
Settings for each instrument
The basic procedure
In each page, strike the pad for which you wish to make set-
tings, and the setting page for that pad will appear. You can
also use [TRIG SELECT] to make your selection by.
■ Adjusting volume (level)
This adjusts the volume of each pad.
fig.06-01
Procedure
1. Press [CONTROL ROOM]-[F1 (MIXER)]-[F1 (VOLUME)].
The “VOLUME” page will appear.
2. Strike the pad that you wish to edit.
The cursor will move to the slider of the pad that you struck.
3. Use the VALUE dial, [INC/DEC] or [CURSOR] to make
the setting.
Parameters
Volume: 0–127
■ Adjusting pan (stereo location)
This adjusts the stereo location of each pad.
fig.06-02
Procedure
1. Press [CONTROL ROOM]-[F1 (MIXER)]-[F2 (PAN)].
The “PAN” page will appear.
2. Strike the pad that you wish to edit.
The cursor will move to the slider of the pad that you struck.
3. Use the VALUE dial, [INC/DEC] or [CURSOR] to make
the setting.
Raising the slider (pressing [INC]) will move the sound
toward the right, and lowering it (pressing [DEC]) will move
the sound toward the left.
Parameters
Pan: L15–Center–R15
■ Adjusting effect send level
This sets the effect Send Level for each pad/sound.
fig.06-03
Procedure
1. Press [CONTROL ROOM]-[F4 (EFFECT)]-[F1 (FXSEND)].
The “EFFECT” page will appear.
2. Strike the pad that you wish to edit.
The cursor will move to the slider of the pad that you struck.
3. Use the VALUE dial, [INC/DEC] or [CURSOR] to make
the setting.
Parameters
Send Level: 0–127
Chapter 5. Control room settings
90