Radio Shack Auvio 40-293 - Manual (Page 3)



1. Remove the inner cardboard
disc from the supplied
template/paint mask and
keep it for later. Use the outer
portion of the mask as a
template to mark the cutout
hole size and location for mounting the
speaker.
. Use a drywall or keyhole saw to cut the hole.
(Optional) Painting the Grille
n
Note: Do not paint internal speaker components.
We recommend you spray-paint the grille so no paint
gets in or blocks the holes.
1. To remove the grille, insert
a paper clip into one of the
openings and pull up.
. Remove the dust cloth from
behind the grille and replace it after you finish
painting.
(Optional) Painting the
Frame
To prevent paint from entering the
speaker, remove the grille and insert
the supplied cardboard paint mask.
After the paint is dry, remove the
paint mask and replace the grille.
Template
Template mask