Radio Shack Xmods 60-391 - Manual (Page 3)

 www.xmodsRC.com www.xmodsRC.com

Your Starter Kit Includes Assembling Your XMODS® Custom RC
Assembling the Wheels
Wheels with tires are included with your XMODS Street starter kit. Follow the steps below to
attach them to your car:
 Line up the flat side of the wheel’s center with the flat side of the axle.
 Gently press the tire onto the chassis.
 Using the supplied Lug Wrench, screw the supplied wheel nut onto the axle and tighten
gently. Do not overtighten.
 Repeat steps 1–3 for each wheel.
 Controller with Antenna
 Car Body Assembly
 Car Chassis
 Car Antenna
 Wheels with Tires (4)
 Lug Wrench
 Wheel Nuts (16)
 Spare Left/Right Side Mirrors
 Screwdriver (not shown)
 Decal sheet (not shown)
11 Spare screws (not shown)
Flat side
of axle
Flat side of
wheel’s center
   




Note: Only a spare left side mirror is supplied for your Mustang car.