Runco SIGNATURE CINEMA SC-50D - Manual (Page 54)

Installation
38 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
PRE
L
IMINAR
Y
Connecting 12-volt Trigger Outputs to External Equipment: If you are installing an
SC-50d/CineWide with AutoScope or SC-60d/CineWide with AutoScope, connect the
AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see Figure 3-18.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
Figure 3-18. Connecting 12-volt Trigger Outputs
USB
To Acces
Video 1 Y Video 2
Video 3 Pr Pb
HDMI 1 HDMI 3
HDMI 2 HDMI 4
Component / SCART
TRIGGERS RS-
1 2 3
HD1
HD2
USB
To Acces
Video 1 Y Video 2
Video 3 Pr Pb
HDMI 1 HDMI 3
HDMI 2 HDMI 4
Component / SCART
RS-
HD1
HD2
Tip = +12V
Sleeve = Ground
AutoScope Lens Motor
3.5-mm
mini plug
AC Input Power
Switch
Retractable Screen or other
12-volt trigger-activated
device