RCA Alert Guard 27V570T - Manual (Page 24)

20 Chapter 3 Graphics contained within this publication are for representation only.
Using the TV’s Features
LOCATIONS
G o b a c k
L o c a t i o n
N o a r e a . . .
L o c a t i o n c o d e
N e a r b y 1 . . .
- - - - - -
S e t a d d i t i o n a l l o c a t i o n s
n e a r M y A r e a .
6. Press the down arrow button to highlight Alarm type. Press the right arrow button to highlight
the type of alarm you want to hear when receiving an Advisory. If you don’t want any alarm set,
choose None.
Notes: For models 20F670T, 27V570T and 27F670T, don’t leave headphones plugged in when they aren’t in use.
Alarms will sound through the headphones and not the TV’s speakers, causing alarms not to be heard.
If your TV is connected to a receiver, amplifier, home theater system, or other audio equipment, alerts won’t be
audible through such devices connected to the audio output terminals of the TV; instead, the Alert Guard
system will turn on the TV’s internal speakers to sound an alarm and make the alerts audible.
7. If you set an Alarm type, press the down arrow button to highlight Alarm volume. Press the
right or left arrow button to set the highest volume of the alarm. You might want to think of
how loud the volume needs to be if you’re somewhere else in your home . For example, if you
want the alarm to wake you up while sleeping in the other room, then you might need to set
the volume at the highest level.
The Siren option is a loud sound, designed to get your attention. The Chime option is a subtle
sound for those easily startled. When the Siren or Chime sounds, it starts soft and continues to
get louder until it reaches the maximum volume you set. The Voice option is the voice of NWR
which states the alert and then shuts off. The Voice option doesn’t get louder. It speaks at the
volume you set.
8. When finished, if you want to customize Warning or Watch level, press the up or down arrow
button to highlight Alert level. Then follow steps 4-7.
Locations
You can receive alerts from three other locations within close
proximity of where you live. To set these areas:
1. Press the MENU button (the MAIN MENU appears).
2. Press the down arrow button to highlight Alert Guard
and press OK.
3. Select Locations from the ALERT GUARD menu.
4. Press the left or right arrow button to choose which area
you want to set, for example Nearby 1 (if you completed
the Alert Guard initial setup, My Area has already been
set). Set the areas in order of priority.
5. Press the down arrow button to highlight No area.
6. Press the right arrow button to highlight the state,
territory, or marine area where you are living or District
of Columbia. These are listed in alphabetical order, with
marine areas at the end of the list (press the left arrow
button to access these quickly).
7. Press the down arrow button to highlight All nearby.
8. Press the right arrow button to choose another area
different than the area set for My Area. This could be
another county, city, parish, area, borough, district, island,
atoll, state or municipality nearby where you are living.
The location code is now set. If you want to set another
area, press the up arrow button to highlight Location.
Press CLEAR to exit.
LOCATIONS
G o b a c k
L o c a t i o n
I n d i a n a . . .
A l l n e a r b y . . .
L o c a t i o n c o d e
N e a r b y 1 . . .
- - - - - -
S e l e c t a s t a t e , t e r r i t o r y ,
m a r i n e a r e a o r D . C . w i t h t h e
l e f t o r r i g h t k e y .
LOCATIONS
G o b a c k
L o c a t i o n
I n d i a n a . . .
M a r i o n C o u n t y . . .
L o c a t i o n c o d e
N e a r b y 1 . . .
0 1 8 0 9 7
S e l e c t a c o u n t y , c i t y , e t c . ,
w i t h t h e l e f t o r r i g h t k e y .
I f y o u r a r e a i s n o t f o u n d ,
s e t t h e c o d e m a n u a l l y .