RCA Alert Guard 27V570T - Manual (Page 26)

22 Chapter 3 Graphics contained within this publication are for representation only.
Using the TV’s Features
Channel Banner
There are several items that might appear when you press the
TV or INFO button on the remote. This display is called the
Channel Banner. The following list describes the items on the
Channel Banner screen (left to right and top to bottom).
SAP Displayed when the current channel is
broadcasting SAP (Second Audio
Program) information.
Displayed when V-Chip has been
activated.
KidPass: 2:24 Displayed when KidPass is set and the
length of time remaining.
CC Displayed when Closed Captioning is
available on the current channel.
Stereo or Mono Stereo displayed when the current
channel is broadcasting in stereo.
Mono displayed when the current
channel is broadcasting in mono.
Skip: 0:30 Corresponds to the SKIP button.
Shows the amount of time left before
the TV switches back to the previous
channel.
07:18 am Displays the current time.
06 ABCDEF Displays the current channel and label
assigned to the channel.
Displayed when you mute the sound.
SAP
Stereo
06 ABCDEF KidPass: 2:24
Skip: 0:30 CC
07:18am
X
X
Why You Should Use the Auto Tuning Feature
The auto tuning feature automatically tunes the TV to the correct channel for
different components you have connected to your TV (like a VCR, DVD Player, etc.)
When you set up auto tuning in the menu system, you don’t have to remember to
change your TV to channel 3; for example, when you want to watch the tape in
your VCR.
How to Set Up the Auto Tuning Feature
The way you set up the auto tuning feature in the TV’s menu corresponds to the
component buttons on the remote and the way you have each component
connected to your TV. When you set up auto tuning, you’re telling the TV what
channel to tune to when you press the VCR1, VCR2, DVD, or SAT•CABLE button on
the remote control.
1. Press MENU (the MAIN MENU appears).
2. Highlight Setup and press OK on your remote control.
3. Highlight Auto Tuning and press OK.