Renesas CPU Board M3A-HS19 - Manual (Page 52)

Operational Specifications
3.1.9 Expansion Connectors (J9-J13)
Rev.1.01 Oct.28.2008 3-12
REJ10J1351-0101
3
3.1.9 Expansion Connectors (J9-J13)
The M3A-HS19 is provided with through-holes for expansion connectors. The Through-holes are connected to the
SH7619 I/O pins. Expansion connectors (J9 - J13) can be connected to the MIL STD connector to mount expansion
boards or to monitor the SH7619 bus signals.
Figure 3.1.10 shows the pin assignment for expansion connectors.
Figure 3.1.10 Pin assignment for Expansion Connectors
Table 3.1.9 lists the pin assignment for the expansion connector (J9).
Table 3.1.9 Pin assignment for Expansion Connector (J9)
Pin no. Signal Name Pin no. Signal Name
1
RESET_IN#
2
PB00/WAIT#
3
PB13/BS#
4
PA25/SIOFSYNC0
5
PC01/MII_RXD1
6
PD3/IRQ3/RXD1/DACK0
7
PC00/MII_RXD0
8
PD2/IRQ2/TXD1/DREQ0
9
PC03/MII_RXD3
10
PE07/HIFRS
11
PC02/MII_RXD2
12
PE01/HIFRDY
13
PC20/WOL
14
NC
15
PC15/CRS
16
PE04/HIFINT#
17
NC
18
NC
19
GND
20
GND