Radio Shack EL-6996 - Manual (Page 15)

13
5. Press m.
The End time will automatically change to 30 minutes after the Start
time. (However, the End time will remain within the specified day.)
6. Enter 11:00AM for the End time, and press m.
7. Press < or > to select
“Yes” or “No” for Alarm setting,
and press m.
If you select “Yes”, the Schedule
Alarm will sound at the time set in
Reminder minutes before the Start time. If you select “No”,
Schedule Alarm will not sound.
Note:
• If you select “No” in step 7, “PLAN”
will appear instead.
Go step 9 to continue.
8. Enter the appropriate time for
Reminder and press m.
Schedule Alarm will sound at the
entered time before the Start time.
You can select any number from
00 to 99.
Note:
• Enter the number in two-digit format.
START : 10 : 00 AM
END : 11 : 00 AM
ALARM :
<
YES
>
REM I NDER :
00 M I N . BEFORE
END : 11 : 00 AM
ALARM :
<
NO
>
REM I NDER :
00 M I N . BEFORE
PLAN : 0
– – – – –
END : 11 : 0
S
0 AM
ALARM :
<
YE
>
REM I NDER :
05 M I N . BEFORE
PLAN : 0
9. Enter the name of the scheduled item into the PLAN field. (Project
meeting)
Up to 96 alphanumeric characters can be entered.
10.Press x to store the schedule listing.
Note:
• When the Home clock time reaches a Reminder time, the Schedule
Alarm will sound for approx. 30 seconds even when the power is
turned off. Press any key to stop the Alarm sounding. When x
is pressed, the listing can be seen in detail in the Schedule mode.
Search
Sequential search
1. Press g once or twice to enter the Schedule mode.
2. Press < or > to search
for the target schedule listing.
The listings stored in the
Organizer will be displayed in
chronological order.
8 – 12 – 2004
START : 12 : 1 5 PM
END : 12 : 45 PM
ALARM : YES
REM I NDER :
EL6996(E).p65 03.6.3, 8:12 PM 13