Roland ATELIER Combo AT-350C - Manual (Page 55)

55
Per
forming
Adjusting the Overall Volume Using an Expression Pedal
You can use a pedalboard (PK series; sold separately) or expression pedal (EV-7; sold separately) to adjust the ATELIER’s overall volume. Stepping down
on the expression pedal will increase the volume; releasing the pedal will decrease the volume.
Decrease
the volume
Increase
the volume
* Completely releasing the expression pedal does not lower the volume to zero. If you do want to turn down the volume completely, set the [Master
Volume] knob to the Min (Minimum) position.
MEMO
• Even as you release your foot from the expression pedal and lower the volume, the lower-range portion will linger on. This provides a natural
sounding resonance.
• When an Active Expression voice is selected, the expression pedal can be used to produce changes in the voice (p. 56).
• Likewise you can specify whether the Expression Pedal will or will not control the volume during the playback of recorded music data (p. 94).
• You can specify whether the expression pedal will function when playing back performance data that was recorded on the ATELIER series (p. 94).