Roland SH-32 - Manual (Page 12)

12
Panel Descriptions
Front Panel
fig.00-02
OSC 1 & 2 (Oscillator 1 & 2)
Section
Select the waveforms on which sounds are based, and adjust the
pitch and other components of the sound. In addition, you can
combine OSC 1 and OSC 2 to create a wide variety of sounds.
→ (p.
52)
FILTER Section
Change the type of filter used, and alter the characteristics of the
sound by making various changes to the output waveforms.
→ (p.
56)
AMP (Amplifier) Section
Alter the sound by changing the volume and the way sounds are
output and muted.
→ (p. 58)
LFO 1 & 2 (Low Frequency
Oscillator 1 & 2) Section
Use the LFO 1 and 2 waveforms to create cyclic changes in the pitch,
brightness, volume, and other aspects of the sounds produced by the
waveforms from OSC 1 and OSC 2.
→ (p. 59)
[INTENSITY]
Change the settings values of the Insertion Effects parameters. The
parameters that can be set vary according to the selected Insertion
Effects.
→ (p. 65)
[INS-FX]
Switches the Insertion Effects on and off. → (p. 64)
[OUTPUT]
Adjusts the overall volume that is output from the rear panel
OUTPUT jacks and PHONES jack.
→ (p. 17)
1 2
4
10
5 6
7
8
9
3
1
2
3
4
5
6