Roland SH-32 - Manual (Page 42)

42
Playing a Chord at the Touch of a Finger (Chord Memory)
Switching Chord Forms
You can select the Chord Form that has the chord you want to play from the preset
Chord Forms.
fig.028
1
Press [CHORD] to make it blink.
2
Press [VALUE ▼ / ▲ ] to select a Chord Form number (11.c–88.c).
The Chord Form number appears in the display.
3
Use the Preview function (p. 21), or a MIDI keyboard to play sounds.
See “Selecting Chord Forms”
(p. 81) for more information
about Chord Forms.
1 2 Display
You can also change the Chord
Form by pressing [BANK] and
[1/A]–[8/R]. In this case, you
will hear the C4 sound for
confirmation.
You can also use a foot switch
to change the Chord Form (p.
91).
Not only can you use the
Chord Forms that come pre-
programmed from the factory,
you can also freely create and
rewrite your own original
Chord Forms as well. For more
detailed instructions on
creating Chord Forms, refer to
“Creating Your Own Chord
Forms” (p. 82).