Rhino Mounts BOOM ARM MOWER DB150 - Manual (Page 121)

OPERATION
DB150 07/11 Operation Section 4-15
© 2011 Alamo Group Inc.
OPERA
T
ION
The operator’s manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.
• Ensure the manual canister is secured to the
equipment with the operator’s manual inside.
• Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals. OPS-U- 0011
• Check that the main driveline is securely
attached to the tractor and the locking collar is
seated in the grooveof the PTO shaft.
• Inspect that the 3-point hitch pins are the
proper size, correctly installed, and secured to
the tractor lift arms with retaining pins inserted.
• Ensure that a properly rated safety tow chain is
equipped securing the mower to the tractor.
OPS-R-0008_B
• Ensure deflectors and/or chainguards are in
position and not damaged. Replace worn,
broken, and missing pieces. OPS-R-0038C_C
Relieve hydraulic pressure prior to doing any maintenance or repair work on the Implement.
Place the Mower Head on the ground or securely supported on blocks or stands, disengage
the PTO, and turn off the engine. Push and pull the control Levers or Joystick several times
to relieve pressure prior to starting any maintenance or repair work.
(SBM-6)