Raritan Computer Raritan ASMI G4 - Manual (Page 43)

Chapter 5. ASMI Module Usage
Remote Console. "Norm" means a standard connection without encryption, "SSL" indicates a secure
connection using the Secure Socket Layer (SSL).
Figure 5-22. Status line
The status line displays the number of frame buffer updates ("Fps") per second as well as the incoming
("In:") and the outgoing ("Out:") network traffic in KB per second. A low value of the network traffic is
recommended and can be achieved as described in
the Section called Optimizing the Video Picture . If
compressed encoding is enabled, the value in brackets displays the compressed transfer rate.
Figure 5-23. Status line transfer rate
The next button displays the Remote Console Access settings.
Table 5-3. Buttons displaying the access state
A single user is connected to the Remote Console of the ASMI module.
One or more users are connected to the Remote Console of the ASMI module.
Exclusive access is set for you. Any other user may not access the remote host via
Remote Console unless you disable this option.
A remote user has exclusive access. You may not access the remote host via
Remote Console unless the other user disables this option.
The outer right button displays the state of the Monitor Only settings.
Table 5-4. Buttons displaying the Monitor Only state
The option Monitor Only is disabled.
The option Monitor Only is enabled.
For more information about Monitor Only and Exclusive Access settings see the relevant paragraphs in
34