Radio Shack PRO-91 - Manual (Page 28)

28
Notes:
• If you want to start the search from a frequency
already stored in one of your scanner’s chan-
nels, press
MAN or PROG , use the number keys
to enter the channel number, then press MAN or
PROG again.
• If you enter an invalid frequency, the scanner
displays Error . Simply repeat this step.
3. Press t to search downward or s to search upward
from the selected frequency. -d- , SEARCH , and t
or s appear.
4. When the scanner stops on a transmission,
quickly press either:
• HOLD to stop searching so you can listen to the
transmission. HOLD appears.
• MON/CLEAR to store the displayed frequency
into the current monitor memory.
To release hold and continue searching, press
HOLD or hold down t or s for at least 1 second. Or,
if you did not press HOLD , simply press t or s to
continue searching.
Note: To step through the frequencies while HOLD
is displayed, press t or s.
Service Bank Search
You can search for weather, ham, marine, aircraft, or
police (fire/emergency) transmissions even if you do
not know the specific frequencies being used in your
area. The scanner is preprogrammed with all the fre-
quencies allocated to these services. To use this fea-
ture, press
SVC . SVC appears and the scanner
searches through the weather service band. To select
a different service bank, press the desired service bank
key (
WX1 , HAM2 , MRN3 , AIR4 , or POL5 ). The corre-
sponding service band number ( -1- , -2- , -3- , -4- ,
or -5- ) appears, and the scanner starts searching the
band.
20-521.fm Page 28 Wednesday, August 4, 1999 3:32 PM