Radio Shack PRO-91 - Manual (Page 49)

49
Or, to enter a Type I ID:
a. Use the number keys to enter the block number
and fleet number, then press • .
b. Enter the subfleet number, then press E .
Note: To clear a mistake while entering an ID,
press
0 then E , then start over at Step 1.
5. Repeatedly press PROG or s to select the next
scan list location you want to program. Then repeat
Step 4 to enter another ID.
Moving IDs to Scan Lists
1. Press MAN . MAN appears.
2. Select the ID scan list location where you want to
store the IDs. Then press PROG . PGM appears.
3. Press MON/CLEAR . A monitor ID appears.
4. Press E . The scanner stores the IDs into the
selected ID scan lists.
Deleting a Stored ID
1. Press PROG . PGM appears.
2. Repeatedly press s or t to select the scan list loca-
tion (shown at the top of the display) you want to
delete.
3. Press 0 then E .
20-521.fm Page 49 Wednesday, August 4, 1999 3:32 PM