Radio Shack TAD 3809 - Manual (Page 18)

18 Operation
• listen to your messages
• record a new announcement
• delete messages
• monitor the room where the TAD is located
Note: You cannot remotely operate the TAD from another
phone on the same line as your TAD.
Changing the Remote Operation Security Code
The TAD’s remote operation security code is preset to 799. Fol-
low these steps to change the code.
1. Hold down CODE/REPEAT for about 2 seconds. The TAD
beeps and the first digit of the preset code flashes.
2. Press SKIP/MEMO or CODE/REPEAT to set the first digit,
then press PLAY/STOP . The second digit flashes.
3. Press SKIP/MEMO or CODE/REPEAT to set the second digit,
then press PLAY/STOP . The third digit flashes.
4. Press SKIP/MEMO or CODE/REPEAT to set the third digit,
then press PLAY/STOP . The TAD beeps once and displays
the new security code one number at a time.
To check the security code, press CODE/REPEAT . The security
code appears one number at a time.