Ryobi RY43006 - Manual (Page 14)

14
Fig. 8
SWITCH LOCK
SWITCH TRIGGER
WARNING:
Keep body to the left of the chain line. Never straddle
the saw or chain, or lean over past the chain line.
STARTING THE CHAIN SAW
n
Make sure no objects or obstructions are in immediate
vicinity which could come in contact with the bar and
chain.
n Press and hold the switch lock. This makes the switch
trigger operational.
n Press and hold the switch trigger, release the switch lock
and continue to squeeze the switch trigger for continued
operation.
STOPPING THE CHAIN SAW
NOTE: It is normal for the chain to coast to a stop once
the trigger switch is released.
n Release the switch trigger to stop the chain saw.
n Upon release of the switch trigger, the switch lock will be
automatically reset to the lock position.
Do not attempt to make any cut that would require removal
of the SAFE-T-TIP
® .
STARTING AND STOPPING THE CHAIN SAW
See Figure 8.
OPERATION
SWITCH LOCK
SWITCH TRIGGER