Ricoh 1350 - Manual (Page 147)

List of the Setting Items
139
5
telnet
The following telnet can be used with the machine:
access, appletalk, authfree, autonet, bonjour (rendezvous), btconfig, device-
name, dhcp, diprint, dns, domainname, help, hostname, ifconfig, info, ipp, ipv6,
lpr, netware, passwd, prnlog, route, set, show, slp, smb, snmp, sntp, spoolsw,
sprint, ssdp, ssh, status, syslog, upnp, web, wiconfig, wins
Settings that can be used with PostScript 3
The following PostScript 3 settings can be used with the machine:
Note
❒ Depending on a type of printer drivers, different items may be displayed.
Settings Selectable Items
Collate: Off, On
Dithering: Auto, Photographic, Text, User Setting
Duplex: Off, Open to Left, Open to Top
Fit to Print Size: Prompt User, Nearest Size and Scale, Nearest Size and Crop
Image Smoothing: Off, On, Auto, Less than 90 ppi, Less than 150 ppi, Less than
200 ppi, Less than 300 ppi
Input Tray: AutoSelect Tray, Tray 1, Tray 2, Tray 3, Tray 4, Tray 5, Tray 6,
Tray 7
Output Tray: Printer Default, Finisher SR5000 Upper Tray, Finisher SR5000
Shift Tray, Finisher BK5000 Booklet Tray
Resolution 600 dpi, 1200 dpi
Size: See General Settings Guide.
Staple: Off, Top Left, Top Right, 2 at Left, 2 at Right, 2 at Top, 2 at Cen-
ter
Edge Smoothing On, Off
Toner Saving On, Off
Type: See General Settings Guide.
Paper Selection: Same Paper for All Pages, Different Paper for First Page, Use
Slip Sheet, Chaptering
Punch: Off, 2 at Left, 2 at Right, 2 at Top, 4 at Left, 4 at Right, 4 at Top,
Multiple at Left, Multiple at Right, Multiple at Top
Z-fold: Off, Bottom Fold, Right Fold, Left Fold