Ricoh 1350 - Manual (Page 58)

Preparing the Machine
50
1
❖ When connected with the network
• The machine must support bidirectional communication.
• DeskTop Binder-SmartDeviceMonitor for Client included on the CD-ROM
must be installed, and TCP/IP must be used.
• Under Windows 2000, [Enable bidirectional support] must be selected, and
[Enable printer pooling] must not be selected on the [Ports] tab with the RPCS
printer driver.
• In addition to the above, one of the following conditions must also be met:
• The DeskTop Binder-SmartDeviceMonitor for Client port and the
TCP/IP protocol must be used.
• The standard TCP/IP port must be used without changing the default
port name (for Windows 2000 / XP and Windows Server 2003).
• Microsoft TCP/IP print IP address must be specified for use (for Win-
dows NT 4.0).
• IPP port name must include the IP address when using the IPP protocol.
❖ When connected with IEEE 1394
• The computer must support bidirectional communication.
• The machine must be connected to the IEEE 1394 connector of a computer
using the IEEE 1394 interface cable.
• [Activate] must be selected in the SCSI print of IEEE 1394 and [Activate] must
be selected in the Bidi-SCSI print.
• Under Windows 2000 / XP or Windows Server 2003, [Enable bidirectional
support] must be selected, and [Enable printer pooling] must not be selected
on the [Ports] tab with RPCS printer driver.
❖ When connected with USB
The machine must be connected to the computer's USB port using the USB in-
terface cable.
The computer must support bidirectional communication.
Note
❒ Install DeskTop Binder-SmartDeviceMonitor for Client from the supplied
CD-ROM.