Important notes, Placement, Maintenance – Roland TD-3KW User Manual

Page 3: Additional precautions

Advertising
background image

3

291a

In addition to the items listed under “USING THE UNIT

SAFELY” on page 2, please read and observe the

following:

Placement

354a

Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed
vehicle, or otherwise subject it to temperature extremes.
Excessive heat can deform or discolor the unit.

356

Do not allow rubber, vinyl, or similar materials to remain
on the unit for long periods of time. Such objects can
discolor or otherwise harmfully affect the finish.

Maintenance

401a

For everyday cleaning wipe the unit with a soft, dry cloth
or one that has been slightly dampened with water. To
remove stubborn dirt, use a cloth impregnated with a
mild, non-abrasive detergent. Afterwards, be sure to wipe
the unit thoroughly with a soft, dry cloth.

402

Never use benzine, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or
deformation.

Additional Precautions

553

Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.

556

When connecting / disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable’s
internal elements.

558a

To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
those around you (especially when it is late at night).

558d

This instrument is designed to minimize the extraneous
sounds produced when it’s played. However, since sound
vibrations can be transmitted through floors and walls to a
greater degree than expected, take care not to allow these
sounds to become a nuisance to neighbors, especially
when performing at night and when using headphones.

The rubber portion of the striking surface is treated with a
preservative to maintain its performance. With the
passage of time, this preservative may appear on the
surface as a white stain, or reveal how the pads were
struck during product testing. This does not affect the
performance or functionality of the product, and you may
continue using it with confidence.

IMPORTANT NOTES

TD-3KW_e.fm 3 ページ 2007年6月19日 火曜日 午後3時12分

Advertising