Renesas Emulator Debugger M16C PC4701 - Manual (Page 240)

7.17.3.1 Pause Task Being Executed at a Specified Position
1.
Click the ID field or (name) field of the task pause display field of the task line to be paused.
After the target task is selected the task ID number appears in the status bar.
In the task source display area, the program starting from the task start address is displayed (if
the program is in a state other than Pause).
2. Click the line to be paused in the task source display area. The Come-pause button and Pause
button are enabled.
3. Click the Come button. The selected task is paused at the position where the task is executed
immediately before the cursor position.
226