Renesas Emulator Debugger M16C PC4701 - Manual (Page 291)

12 Attention
277
12.5.4 When Using the IAR C Compiler (ICC)
12.5.4.1 Specify the Option
Please compile according to the following procedures and link.
•
At compilation
Specify the "-r" option.
•
Before linking
Open the linker's option definition file (extension .xcl) to be read when linking and add
"-FIEEE695" and "-y" options. The designation of "-y" option varies depending on the product.
Product Name -y Option
The debugger for M32C -ylmb
The debugger for M16C/R8C -ylmb
The debugger for 740 -ylmba
At link
Specify the linker's option definition file name using "-f" option.
We do not evaluate other settings, so we can not recommend to append other options.
12.5.4.2 Command Execution Examples
The following shows examples of entering commands depending on the product
•
The debugger for M32C
>ICCMC80 -r file1.c<Enter>
>ICCMC80 -r file2.c<Enter>
>XLINK -o filename.695 -f lnkm80.xcl file1 file2<Enter>
•
The debugger for M16C/R8C
>ICCM16C -r file1.c<Enter>
>ICCM16C -r file2.c<Enter>
>XLINK -o filename.695 -f lnkm16c.xcl file1 file2<Enter>
•
The debugger for 740
>ICC740 -r file1.c<Enter>
>ICC740 -r file2.c<Enter>
>XLINK -o filename.695 -f lnk7400t.xcl file1 file2<Enter>
The XCL file name varies depending on the product and memory model. For details, see the ICCxxxx
manual.