Omron VIBRATING MESH NEBULIZER NE-U22V - Manual (Page 11)

Troubleshooting
21
Tr
oubleshooting and W
a
rranty
Tr
oubleshooting
Troubleshooting
20
Tr
oubleshooting
Tr
oubleshooting and W
a
rranty
If a problem occurs while you are using the unit, please check the following information before calling.
The nebulization rate is extremely low, or the unit does not nebulize at all.
Where to Inspect How to correct
Is the Battery Low Indicator turned on?
Is the Mesh dirty?
Replace the batteries with new ones.
(Refer to Page 10)
Where to Inspect
Are the batteries worn?
Is the AC Adapter securely plugged into
the electric outlet or the connection port
of Main Unit?
Is the capacity of the rechargeable batteries
(NiMH) low?
Is the Medication Bottle installed to the Main
Unit correctly?
Replace the batteries with new ones.
(Refer to Page 10)
Insert it correctly. (Refer to Page 11)
Recharge the batteries with the commercially
available recharger or replace them
with new ones.
Install it correctly. (Refer to Page 13)
The Power Indicator is illuminated, but the unit does not nebulize.
Where to Inspect How to correct
Is the Medication Bottle filled with medication?
Is the Mesh broken, stained,
or extremely soiled?
Has any medication or water collected on the
electrode of the Main Unit?
Fill with medication. (Refer to Page 12)
Clean the Mesh Cap by disinfecting.
(Refer to Page 18)
• If the unit does not nebulize even after
carrying out the above-mentioned procedure,
or the Mesh is broken, replace the Mesh Cap
with a new one.
(Refer to Page 19)
The Power Indicator does not turn on and the unit does not nebulize.
Clean the Mesh Cap by disinfecting to remove
any stains.
(Refer to Page 18)
• If the trouble is not corrected by the above
mentioned procedure, replace the Mesh cap
with a new one.
(Refer to Page 19)
Are the polarities of batteries or rechargeable
batteries placed in the wrong direction?
Insert batteries or rechargeable batteries in the
correct alignment.
(Refer to Page 10)
How to correct
Wipe off the stain. (Refer to Page 17)
Is the medication being supplied to the
Medication Bottle?
(Is the medication in contact with the Vibrator?) Use the unit slightly slanting the Main Unit
(the side with the Button) towards yourself.
(Refer to Page 15)
Absorb the medication or water with
a soft cloth.
(Refer to Page 15)
Is the electrode of the Main Unit stained?