Sylvania 6727FRE - Manual (Page 10)

C
ONNECTIONS
10
Connection of Main Unit
Plug in the AC power cord of this unit.
or
Cable
Signal
Connect
Antenna
1
2
AUDIO OUT
COAXIAL
(Rear of main unit)
Connection to Cable Box or Satellite Box
Select this connection when you want to view or record a scrambled channel. With this connection, channels
cannot be changed on the TV/VCR/DVD unit. You can view or record ONLY the channels you have selected
on the cable box or the satellite box.
• While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
1) Turn on this unit by pressing POWER button. Then, press the CHANNEL K/L buttons to select channel 3
or 4 (the same channel as the output channel of the cable box or satellite box).
2) At the cable box or satellite box, select the channel you want to view or record.
AUDIO OUT
COAXIAL
(Rear of main unit)
IN OUT
Cable
Signal
(Cable box or
Satellite box)
Note for the Cable TV System Installer:
This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the National Electrical Code, which pro-
vides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the
building as close to the point of cable entry as possible.
T2021UB_01-44.QX33 04.9.16 10:58 AM Page 10