Olympus C-2040ZOOM - Manual (Page 134)

134
5
Using Flash
Press the [OK] button
repeatedly until the menu
disappears.
7
Using external flash
•
The selected setting is retained until changed, even when the camera is
switched off.
•
In some situations, the external flash may misfire.
•
Always use the dedicated flash bracket and bracket cable to connect the
FL-40 to the camera. If you use any other method, you will not be able to
access the dedicated functions offered by the FL-40 external flash.
7
Using a different external flash
You can also use the optional dedicated flash bracket FL-BK01 and bracket
cable FL-CB01 to mount a different external flash on the camera.
For information on the requirements for compatible external flash units, see
"Supported third-party flash units" on P.136.
Mount the external flash on
the dedicated flash bracket.
Then fasten it to the cam-
era's tripod socket and use
the dedicated bracket cable
to connect the flash brack-
et to the 5-Pin external
flash socket on the camera.
1
A/S/M
5-Pin external flash socket