Olympus C-2040ZOOM - Manual (Page 94)

94
4
Custom Photography
Continuous shooting at stepped exposures (Auto Bracket)
Press or to select
the number of shots.
Press twice to confirm
the setting.
Press the [OK] button
repeatedly until the menu
disappears. The setting is
saved.
● If you take the shot without
pressing the [OK] button, the
setting remains valid until you
press the the
(Menu)
button again.
Take the shot.
● When you release the shutter
button during shooting, the
camera stops shooting even if
the job is not completed.
Shooting ends when the
specified number of frames
have been shot.
8
7
6
5
BKT
[ 1 / 3 ]
AF 0.3
F2.0 1/800 0.0 P
0.6
1.0
3
5
8
•
The focus and white balance are determined for the first shot.
•
Auto bracket can be used in Program mode, Aperture Priority mode or Shutter
Priority mode.
•
Auto bracket cannot be used in the TIFF quality mode.
•
You can select only 3 as the number of shots in SHQ mode.
•
If there is insufficient buffer space available for the selected number of shots,
the camera cannot take the next shot.
•
Flash cannot be used.
•
Unless you select "OFF" in the "ALL RESET" setting (P.173), this setting will
be cancelled when you switch the camera off.
6 5
7