Installing batteries, Accessories – Sylvania SRZ3000 User Manual

Page 12

Advertising
background image

You will find STB and the following accessories
when unpacking the carton box of STB:

1 Unsnap the battery cover from the back

of the remote control.

2 Install two AA batteries making sure

the polarity (+ / -) direction is correct.

NOTE:

When replacing batteries, make sure to replace them
in pairs.

3 Snap the battery cover back.

CAUTION:

Do not mix battery types.
(alkaline and manganese)

Do not recharge, short-circuit, heat, burn or
disassemble batteries.

Installing batteries

STB
SRZ3000

Remote controller unit and AA batteries (x2)

Owners manual

Accessories

12

EN

1A23

Before Using

A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-
tions concerning chemical wastes.

ST200.qxd 03.3.19 7:05 PM Page 12

Advertising