Advanced operation, 3 select auto using, Navigation buttons, then press enter – Sylvania SRZ3000 User Manual
Page 76: 5 select the desired channel using, 6 press enter to exit setup menu, Navigation button to search, Channel search completed.” will be indicated
3 Select AUTO using
o
o
/ p
p
navigation
buttons, then press ENTER.
•
Auto clock setting menu will appear, then STB
will start searching for channels with clock data.
When not using the auto-clock setting:
Select OFF from the channel-map, then press
ENTER
.
TIP:
OFF is located at the top of the channel map. Keep
pressing
o
navigation button to search.
4 When searching is complete, the
channel numbers being searched for
will become black on the channel map.
•
“Channel search completed.” will be indicated.
5 Select the desired channel using
o
o
/ p
p
navigation buttons, then press ENTER.
•
The selected channel will be set, then the clock of
STB will be activated.
TIP:
You can select the desired channel being searched on
the channel map by moving the cursor even when
STB is in the searching mode.
6 Press ENTER to exit SETUP menu.
CLOCK
QUIT
CHANNEL
DISPLAY
CLOCK
DETAIL
DST
ON
TIME ZONE
CENTRAL
MANUAL
AUTO
4CH
2002/ 1/31( THU ) 2 50PM
CLOCK
QUIT
CHANNEL
DISPLAY
CLOCK
DETAIL
Select a channel for auto clock setting.
5
3
2
4
Channel search
completed.
4
OFF
CLOCK
QUIT
CHANNEL
DISPLAY
CLOCK
DETAIL
Select a channel for auto clock setting.
2
Searching.
4
3
2
1
OFF
76
EN
1A23
Advanced Operation
ST200.qxd 03.3.19 7:06 PM Page 76