One for All (URC-8910) - Manual (Page 32)

a. Press SELECT once to enter Playback Control
Group assignment.You will see the display change
to the last-selected device (e.g., [TV]).
b. Select a device for Playback Control Group assign-
ment. For this example, press VCR once. This will
assign the entire group of Playback Controls (i.e.,
PLAY, STOP, FF, REW, F.FWD, F.REW, PAUSE, and
REC) to the VCR.You will see the display change
to your device choice (e.g., [VCR]).
c. Press SELECT once to accept the assignment in
step 3b.You will see the display change to the next
Control Group assignment, [AUDIO]).
4. Press SELECT once to enter Audio Control Group
assignment.You will see the display change to the
last-selected device (e.g., [VCR]).
a. Select a device for Audio Control Group assign-
ment. For this example, press TV once. This will
assign the entire group of Audio Controls (i.e.,
VOL+, VOL-, and MUTE) to the TV.You will see the
display change to your device choice (e.g., [TV]).
b. Press SELECT once to accept the assignment in
step 4a.You will see the display change to the next
Control Group assignment, [CHANNEL]).
5. Press SELECT once to enter Channel Control Group
assignment.You will see the display change to the
last-selected device (e.g., [TV]).
continued on next page...
32
Producer 2002 IR Mnl 4/4/02 10:02 AM Page 45