Sylvania 6727DG - Manual (Page 12)

12
EN
The unit selects available TV channels automatically
when you connect an Antenna or Cable TV signal to
it. To reset TV channels, see page 21.
If you are using a Cable Box or Satellite Receiver,
you do not need to set channels at the unit.
1
Press [POWER] to turn on the unit.
2
To watch TV, use [CH. K K / L L ] to select memo-
rized channels. Memorized channels are those
that appear when you flip through channels. If a
channel is skipped, you still can use the
Number buttons to select it. This is a non-
memorized channel; it may have weak reception
in your area.
To update your memorized and non-memorized
channels, see page 20.
Remember, if you are using a Cable Box/Satellite
Receiver, set the unit to channel 3, 4 or AUX.
Change channels at the Cable Box/Satellite
Receiver.
3
Press [VOL. X X / Y Y ] to adjust
the volume. Press [MUTE] to
instantly mute the sound.
Press it again to restore the
previous sound level.
CHANNEL SELECTION
• To select the memorized channels, use
[CH. K K / L L ] or the Number buttons.
• The deleted channels can only be selected with
the Number buttons.
• When selecting the channels larger than 100,
press [+100] first. Then use the Number buttons
to press the lower 2 digits.
TV
WATCHING TV
SWITCHING MODE
• Press [SELECT] to select TV/VCR or DVD mode.
(TV/VCR mode includes Analog TV, Digital TV or
AUX mode.)
The corresponding light (TV/VCR or DVD) will
appear on the front of the unit to indicate which
mode is active. Details are on page 11.
• To put the unit into the VCR mode, press [PLAY B B ]
(VCR) when in any mode other than DVD.
• When the unit switches from analog to digital, it
may take a while until the digital channel selection
is completed.
CD DVD-V VCR DTV TV
• When selecting the channels with [CH. K K / L L ], the
major channel selection will be followed by the
minor channel selection.
• When selecting the channels with the Number
buttons, enter the major channel number followed
by the minor channel number. For example, if the
channel you want to select is 12 (major)-3 (minor),
press 1
→
2
→
0
→
3. (You must press 0 first
when entering a single digit channel number.)
• To search the minor channel of the major channel
currently viewed in DTV, press [+100]. If you know
the minor channel while viewing the major chan-
nel with 1-digit channel number, press the major
channel number and press [ENTER]. Then, press
the minor channel number you want to view. In
case the major channel number is 2 digits, press
the major channel number and press the minor
channel number directly. If you press [ENTER]
after pressing the 2-digit major channel number,
the smallest minor channel will be selected.
DTV
T
V OPERATION AND SETTINGS
TV/DTV SECTION
TV DTV
VOLUME 20
Major Channel/Minor Channel
In the DTV broadcasting, one channel may
consist of one main channel and multiple sub-
channels depending on the airtime. In this case,
the main channel is called major channel and
the sub-channel is called minor channel.