Olympus Floppydisk Adapter MAFP-1E - Manual (Page 38)

38
E
INSTALLING THE SOFTWARE (Windows 3.1)
To install the provided software when using Windows 3.1
1 Turn the computer and start up Windows 3.1.
2 Insert the Driver Setup Diskette (FPD-2E) in the FDD.
3 In the Program Manager, select [Icons], then [Run]. Enter
“a:\setup16.exe” and click the OK button.
4 When the Setup window appears, follow the on-screen
instructions to install your software.
5 When installation is complete, a dialog box appears asking
whether or not to restart your computer.
6 Restart the computer to initialize the installed software.
If you specify the software installation destination
directory name using 2-byte characters such as
Chinese or Japanese letters when installing software
in your computer, the operation after installation may
be abnormal at times. To prevent this, be sure to use
1-byte characters in the installation destination
directory name.
◆ The computer must be restarted before you can
use your software
◆ If your FDD is not drive A, check the FDD drive
and execute “Setup16.exe” from that drive.
◆ Read the latest information on your software in
the “README.TXT” file stored on the floppy disk.
◆ “Setup.exe” is the setup program for Windows 95.
Do not run this program.
CAUTION