Olympus DS3300 - Manual (Page 19)

1
19
Setting the correct time and date on the recorder is very important since every file recorded on
the recorder will have the date and time information as part of the file header. This will simplify
the file management aspects later on.
The hour indicator will flash automatically when you load batteries before using the
recorder for the first time, or after the recorder hasn’t been used for a long time.
Proceed from step 1.
1 Set the hour.
1 Press the FF button or REW button to
set the hour.
2 Press the REC button to accept the hour.
• You can choose between 12 and 24 hour
display by pressing the CUSTOM button
while setting the hour and minute.
Example: 5:45 P.M.
5:45 PM
←→ 17:45
(Initial setting)
2 Set the minute.
1 Press the FF button or REW button to
set the minute.
2 Press the REC button to accept the
minute.
3 Set the year.
1 Press the FF button or REW button to
set the year.
2 Press the REC button to accept the year.
• You can choose a different date format by
pressing the CUSTOM button while setting
the date.
Setting Time/Date (TIME&DATE)
Setting Time/Date (TIME&DA
TE)
FOLDER/MENU button
(accepts a choice and moves on to
the next item)
FF/REW
button
(alters a choice)
CUSTOM
button
(switching
the data
displayed)