Olympus DS3300 - Manual (Page 71)

71
5
When recording voice to be
processed with voice recognition, set
up your DSS recorder as follows to
improve recognition accuracy.
• Set the microphone sensitivity to “DICT.”
(
☞ P.27).
• Set the recording mode to “SP”
(
☞ P.28).
• Set the Variable Control Voice Actuator
(VCVA) to “OFF” (
☞ P.29).
• Register/enroll your voice in the voice
recognition software using the recorder.
• Record in a relatively quiet environment.
• Have the recorder microphone 5 to 10
cm (2 to 4 inches) away from your chin.
• Speak normally.
• It is recommended to use the noise-
cancellation microphone, ME12, when
recording.
Dictation files recorded under the
following conditions cannot be
processed by voice recognition
because their recognition accuracy
rates will be very low.
• A conference or meeting where many
voices are recorded.
• Seminar or lecture where high-level
ambient noise tends to be recorded.
Notes on Recording For Voice Recognition
Using V
oice Recognition Software (Optional)