Oki B930d - Manual (Page 123)

B930n User’s Guide> 127
W
HEN
U
SING
U
NIX
The printer is not Printing
CAUSE VERIFICATION ACTION
Incorrect IP
address.
Ask the network
administrator to
check if the IP
address is
correct
Set up the correct IP address for the
printer.
Error occurs on the
network connecting
the workstation
and the printer.
Activate the
network test
mode (ping) on
the workstation
to check the
communication
status.
As the network administrator to look
into the network failure.
Unable to set the
correct printer
entry on the
workstation.
Check and
correct the
printer entry
settings on the
workstation.
Check the/etc/
printcap file on
the workstation
or use the lpstat
command to
troubleshoot.
Re-enter the correct printer entry.
The printer is in the
offline status.
Check whether
Off-line is
displayed on the
printer Operator
Panel.
Press the <ON LINE> button.
If LPD spool is set
to [On], the print
data sent by the
user in a single
print instruction
has exceeded the
remaining storage
capacity of the
destination device.
Check the
remaining
storage capacity
of the
destination
device.
1. If single print data has exceeded the
storage capacity of the destination
device, free space on the device, or split
the file into smaller ones to keep them
below the remaining storage space
2. If multiple files have exceeded the
storage of the destination device,
reduce the number of files which can be
sent at a time.
An irrecoverable
error has occurred
during print.
Check the error
message on the
printer Operator
Panel.
Switch off the printer, then switch it on
again.