Optibase MGW 2400 WMT - Manual (Page 84)

Chapter 3 • Editing the Channel Profile
5. To continue, click Next ; channel parameters
appear.
•
Input parameters. To view advanced video input
parameters, click Video
. For information, refer
to page 81.
• Encoding (processing) parameters. To view
advanced video or audio encoding parameters, click
Video
or Audio respectively. For
information on encoding parameters, refer to page 81.
• Target parameters. To view or edit parameters,
select the desired target and click Edit
. For
information on target parameters, refer to page 86.
To complete adding the channel:
• Once you have finished setting parameters, click Apply
; the Channel wizard closes and the channel appears
in the list with the new parameters set.
Note
• You cannot add or remove targets for an existing channel. If you wish to
remove or add targets, you have to define a new channel.
• When clicking Apply , a window appears indicating that the
desired channel is being added. If this window does not close within 5
minutes, click Close and wait until the new channel appears in the
Channels list.
74