OPPO Digital OPPO DV-980H - Manual (Page 39)

A D V A N C E D O P E R A T I O N S
35
Memory and Automatic Resume
EJECT POWER
PLAY STOP
1. The DVD player automatically remembers the current position when
playback is interrupted. Operations such as EJECT, STOP or
turning POWER off will cause the DVD player to save the current
playing position.
2. The position is memorized even after turning off the unit or
changing the disc.
3. When the next time the disc with a memorized playing position is
played back, the DVD player will recognize the saved playing
position. Playback will automatically resume from the saved playing
position. However if you wish to cancel the automatic resume and
start playback from the beginning, you may press the STOP button
when prompted.
4. The DVD player can remember playback position for up to 5 discs.
When the sixth disc is memorized, the oldest one is replaced.
5. This function applies to DVD discs only.
Viewing Static Pictures on DVD-Audio Discs
DVD-A
NEXT PAGE
PREV PAGE
Some DVD-Audio discs contain static pictures, such as photos of the band
or narration of the album. When a DVD-Audio track is playing, you may use
the PREV PAGE button (same as the SUBTITLE button) to select the
previous picture or the NEXT PAGE button (same as the ANGLE button) to
select the next picture.
Disc Information Browser
The disc information browser enables you to conveniently view the disc information, perform disc
navigation and playback control. The following example shows how to use the disc browser during DVD
playback.
1. Press the INFO button on the remote control. The TV screen displays the following:
MENU
BITRATE 85 TITLE ELAPSED: 0:01:25
Disc Format D5 DISC
Video Type NTSC
Video Scale 4:3
Title 01/01
• Video preview in the top half of the screen
• Disc information in the lower half of the screen
• Current bit rate (unit: 100kbps) and playback time at the
bottom of the screen
2. Press the up/down ARROW buttons to select an item in the disc information display. If the
selected item allows modification, press the SELECT button to make selections or
modifications.