Specifications – Onkyo CR-715 User Manual
Page 57
57
Specifications
Specifications and features are subject to change without notice.
General
Power Supply:
AC 230 V, 50 Hz
Power Consumption:
42 W
Stand-by Power Consumption:
0.38 W
Dimensions (W
×
H
×
D):
205
Ч
116
Ч
335 mm (8-1/16"
Ч
4-9/16"
Ч
13-3/16")
Weight:
4.6 kg (10.1 lbs.)
Audio Inputs
Digital Inputs:
CR-715DAB: 1 (optical)
Analog Inputs:
4 (LINE1, LINE2, MD/TAPE, DOCK/CDR)
Audio Outputs
Analog Outputs:
2 (MD/TAPE, DOCK/CDR)
Subwoofer Pre Outputs:
1
Speaker Outputs:
2
Phones:
1
Amplifier Section
Power Output:
50 W + 50 W (4
Ω, 1 kHz, 1% THD)
THD (Total Harmonic Distortion):
0.5% (Power Rated) 0.08% (1 kHz, 1 W)
Damping Factor:
50 (Front, 1 kHz, 8
Ω)
Input Sensitivity and Impedance:
150 mV/50 k
Ω (LINE)
Output Level and Impedance:
150 mV/2.2
Ω (REC OUT)
Frequency Response:
10 Hz–60 kHz/+1/–3dB (LINE1)
Tone Control:
±6 dB, 80 Hz (BASS)
±8 dB, 10 kHz (TREBLE)
+8 dB, 80 Hz (S.BASS)
Signal to Noise Ratio:
100 dB (LINE1, IHF-A)
Speaker Impedance:
4
Ω–16 Ω
Tuner Section
FM
Tuning Frequency Range:
87.5 MHz–108.0 MHz
Usable Sensitivity:
Stereo: 22.2 dBf (IHF)
Mono: 15.2 dBf (IHF)
Signal to Noise Ratio:
Stereo: 67 dB (IHF-A)
Mono: 73 dB (IHF-A)
THD (Total Harmonic Distortion):
Stereo: 0.5% (1 kHz)
Mono: 0.3% (1 kHz)
Stereo Separation:
40 dB (1 kHz)
DAB (CR-715DAB only)
Tuning Frequency Range:
174.928–239.200 MHz
Frequency Response:
20 Hz–20 kHz
Signal to Noise Ratio:
94 dB
THD (Total Harmonic Distortion):
0.09%
CD
Frequency Response:
4 Hz–20 kHz
Audio Dynamic Range:
96 dB
THD (Total Harmonic Distortion):
0.005%
Wow and Flutter:
Below threshold of measurability
Audio Output/Impedance (Analog):
1.3 V (rms)/1 k
Ω