OnStar 17572 R17 - Manual (Page 35)

OnStar Hands-Free Calling
33
Storing your voice mailbox number and your
password together
You can store your voice mailbox number and password as a nametag.
1. Push the phone button and after the “OnStar
Ready” response, use the ”Digit Store” command.
2. The system will ask you for each digit. Say the fi rst digit of
your mailbox number and wait for it to be repeated.
3. Continue until every number has been entered, then say
“Pause.” Next, say each number of your voicemail password.
4. When all the numbers have been entered and repeated,
give
the “Store” command.
5. Choose a nametag, like “voicemail and password.”
6. Confi rm the nametag by responding “Yes.”
NOTE: By inserting the word “Pause,” you create a 3 second
delay between the mail box numbers and the password numbers.
This allows mail box numbers to dial to your voicemail system
fi rst, pause, then dial the tones of your password numbers. You
may have to use 2 or 3 “pauses” to lengthen the delay between
dialing your mailbox and your password numbers.
Now you can call your voicemail system. When you hear your voicemail
system prompt you for your mailbox and password, push the steering wheel
control and respond to the “Say digit or send nametag?” prompt
by saying “Send Nametag.” When the system responds, “Please say the
nametag,” say “voicemail and password.” Once you are in your voicemail
system, you can use the steering wheel control to enter functions. Push the
control, say the digit you want then say “Dial.” Once you have entered your
voice mail system you can enter single digits for deleting or leaving messages
by pushing the steering wheel control and saying the number of the command,
then saying “Dial.” This takes a little practice and should allow you to navigate
through most voice mail systems.
17572 R17 9.28.06_singlepgs.inddSec1:35 Sec1:35 17572 R17 9.28.06_singlepgs.inddSec1:35 Sec1:35 10/5/06 2:28:16 PM 10/5/06 2:28:16 PM