Oki Pos 407II - Manual (Page 42)

–  –
10-6. Reliability Specifications
() MCBF: 60 million lines
• Recommended thermal paper (60 μm to 75 μm)
• Average printing rate: .%
• Printing density: standard setting
Note: The Mean Cycles Before Failure (MCBF) with the recommended thermal paper
thickness between 75 μm and 150 μm is 25 million lines.
() Auto cutter (life)
Paper width . mm, . mm *Including backing paper
• Paper thickness between 65 μm and 100 μm: 2 million partial cuts, 1.6 million full cuts
• Paper thickness between 100 μm and 150 μm: 600,000 cuts both partial and full
Paper width . mm
• Paper thickness between 65 μm and 85 μm: 600,000 partial cuts, 500,000 full cuts
Paper width . mm, . mm full-face thermal label paper
• Paper thickness between 100 μm and 150 μm: 300,000 cuts both partial and full
Notes:
) When using full-face thermal label paper, periodically clean the glue that may have
accumulated on the cutter blade.
) If glue has accumulated on the cutter blade, it could adversely affect cutting perform-
ance.
* A cutter is said to have reached its life when it has entered the wear failure pe-
riod.
* The figures indicated in the reliability specifications above are based on the use of
recommended thermal paper. As such, reliability is not guaranteed if non-recom-
mended thermal paper is used.