Sylvania SSC191 - Manual (Page 22)

- 22 - EN
1B15
SELECTING THE MTS SYSTEM
Make sure ...
• TV/VCR power must be turned on.
TO SELECT HIFI MODE
1
Select “USER’S SET UP”
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to “USER’S SET UP”.
Then, press the F.FWD/Bbutton.
2 Select“VCR AUDIO”
Press the PLAY/K or STOP/L but-
ton to point to“VCR AUDIO”.
Then, press the F.FWD/Bbutton.
3 Select [HIFI]
Press the F.FWD/B or REW/s
button until [HIFI] appears.
4
To return to TV mode
Press the MENU button on the remote control to
return to TV mode.
NOTES:
•
Nomally, “HIFI” should be selected for playback-
with HIFI sound.
•
When you play non-HIFI tapes, the TV/VCR will
play automatically in the monaural mode.
•
The TV/VCR records automatically MTS broad-
casts in HIFI stereo sound unless you select SAP
mode recording before you begin recording.
TO SELECT STEREO, SAP, OR MONO
1 Select “USER’S SET UP”
Press the “MENU” button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to “USER’S SET
UP”.Then, press the F.FWD/B
button.
2 Select “TV AUDIO”
Press the PLAY/K or STOP/L but-
ton to point to“TV AUDIO”. Then,
press the F.FWD/Bbutton.
3
Select [STEREO], [SAP], or [MONO]
Press the F.FWD/B or REW/s button until
[STEREO], [SAP], or [MONO] appears.
4
To return to TV mode
Press the MENU button on the remote control to
return to TV mode.
NOTES:
• You must select the recording mode,either TV
AUDIO [STEREO] or [SAP] when you record a
broadcast.
Refer to “MTS RECORDING/MONITOR MODE”.
• If you select second audio when second audio is not
available, the TV/VCR will record normal audio.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– USER’S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
B VCR AUDIO [HIFI]
TV AUDIO [STEREO]
– USER’S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
VCR AUDIO [HIFI]
B TV AUDIO [STEREO]
– USER’S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
B VCR AUDIO [HIFI]
TV AUDIO [STEREO]
TO SELECT MONO MODE
You can change the selection to “MONO” if you
want to listen to HIFI tapes in normal audio play-
back.
1) Press the MENU button on the remote control.
Press the PLAY/K or STOP/L button to point to
“USER’S SET UP”.Then, press the F.FWD/B
button.
2) Press the PLAY/K or STOP/L button to point to
“VCR AUDIO”. Then, press F.FWD/Bbutton.
3) Press the F.FWD/B or REW/s button until
[MONO] appears.
4) Press the MENU button on the remote control to
return to TV mode.
T7205.QX33 01.3.19 10:26 AM Page 22