Index search – Sylvania SSC191 User Manual

Page 26

Advertising
background image

- 26 -

EN

1B15

INDEX SEARCH

This feature provides a method of indexing the start-
ing point so that it can be easily returned to in either
fast forward or rewind mode.

The index mark will be made automatically when
the REC button is pressed. It will also be marked at
the starting point of Timer recording and OTR.

The index mark will not be recorded if the
PAUSE/STILL button is pressed and released dur-
ing recording.

The time gap between making the index marks on
the tape should be greater than 1 minute for SP
recording, 2 minutes for LP recording and 3 min-
utes for SLP recording.

In some cases, the index mark at the beginning of
video tape cannot be detected.

Example: You are watching program number 4 and

want to fast forward to program number 7. You
must skip three programs.

1

Select “INDEX SEARCH”

Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to “INDEX SEARCH”.
Then, press the F.FWD/Bbutton

2

Enter your desired number

Press the PLAY/K or STOP/L but-
ton until the number of programs
that you want to skip appears.
(Example: “03” for 3 programs)

The Index Search mode will be
canceled if the procedures are not
activated in 30 seconds.

3

Begin Index Search

Press the REW or F.FWD button. The TV/VCR
begins rewinding or fast forwarding to the beginning
of desired program.
NOTE: Every time an index signal is skipped, the
number in the program indicator decreases by one.

4

After Index Search

When the preset program is reached, the TV/VCR
will start playback automatically.

A video cassette must be inserted in the TV/VCR
for this function to work.

The number of Index Searches can be set up to 20.

This function will not operate in the recording mode.

When you want to cancel the Index Search while
in progress, press the STOP button.

Pro.1

Pro.2

Pro.3

Pro.4

Pro.5

Pro.6

Pro.7

4

3

2

1

1

2

3

End of tape

Beginning of tape

CURRENT PLAYBACK PROGRAM

INDEX MARK

– M E N U –

TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH

B

INDEX SEARCH

INDEX SEACH

0 3

T7205.QX33 01.3.19 10:26 AM Page 26

Advertising