Olympus FE-5050 - Manual (Page 16)

16 EN
The included USB-AC adapter has been designed to
be used only for charging. Make sure that operations
such as shooting, viewing images and so on are not
being used while the USB-AC adapter is connected
to the camera.
Example: USB-AC adapter with an AC Example: USB-AC adapter with an AC
cable
cable
1
2
3
1
AC outlet
USB cable (supplied)
Multi-connector
When the camera is connected to another device via
USB, a message will be displayed prompting you to
choose a connection type. Select [CHARGE].
2
Indicator lamp
On: Charging
Off: Charged
FE-4050 FE-5050
The battery is not fully charged at the time of
purchase. Before use, be sure to charge the battery
until the indicator lamp turns off (up to 3 hours).
If the indicator lamp does not light, the camera is not
correctly connected or the battery, camera, or USB-
AC adapter may not be functioning as expected.
For details on the battery and the USB-AC adapter,
see “The battery and USB-AC adapter” (p. 58).
The battery can be charged while the camera is
connected to the computer. Charging time varies
depending on the performance of a computer. (There
may be cases in which it takes approx. 10 hours.)
When to charge the batteries When to charge the batteries
Charge the battery when the error message shown below
appears.
Monitor top left Error message
Flashes in red
44
BATTERY EMPTY