Olympus FE-5050 - Manual (Page 55)

55 EN
Error message Corrective action
JAMMED
Printer problem
Remove the jammed paper.
SETTINGS
CHANGED *3
Printer problem
Return to the status where the
printer can be used.
PRINT ERROR
Printer problem
Turn off the camera and printer,
check the printer for any problems,
and then turn the power on again.
CANNOT PRINT *4
Problem with selected image
Use a computer to print.
*1 Before erasing important images, download them to a
computer.
*2 All data will be erased.
*3 This is displayed, for instance, when the printer’s paper
tray has been removed. Do not operate the printer while
making the print settings on the camera.
*4 This camera may be unable to print images taken by
other cameras.
Shooting tips
When you are unsure of how to take a picture that you
envision, refer to the information below.
Focusing
“Focusing on the subject”
Taking a picture of a subject not in the center
of the screen
After focusing on an object at the same distance
as the subject, compose the shot, and take the
picture.
Pressing the shutter button halfway (p. 20)
Set [AF MODE] (p. 35) to [FACE/iESP]
Taking a picture in [AF TRACKING] mode (p. 35)
The camera tracks the subject movement
automatically to focus on it continuously.
Taking a picture of subjects where autofocus
is diffi cult
In the following cases, after focusing on an object
(by pressing the shutter button halfway down) with
high contrast at the same distance as the subject,
compose the shot, and take the picture.
Subjects with low contrast
When extremely bright objects
appear in the center of the screen
●
●
●
●