Onkyo T-433 - Manual (Page 17)

17
Listening to the Radio —Continued
Note:
If you store a station to a preset that already had a sta-
tion stored in it, the previous station will be replaced.
After Storing Presets You Can
• Select them and enjoy your favorite stations
• Name them for easy identification (see page 18).
• Delete them (see page 19).
You must store some presets before you can select them
(see page 16).
Before proceeding, turn on the T-433.
4 Press the [MEMORY] button.
The MEM indicator appears and the
preset number flashes. If you don’t
complete the next step within 8 sec-
onds, the T-433 will return to the pre-
vious condition and the MEM
indicator will disappear.
Note:
Be careful not to press the [MEM-
ORY] button for too long because
“AUTO PRESET” will flash on the dis-
play and the Auto Preset function will
begin, replacing all of your previously
stored presets.
5 Use the TUNING/PRESET
[
]/[ ] buttons to select a pre-
set number from 1 through 30.
6 Press the [MEMORY] button
again to store the station.
The station is stored, the preset number
stops flashing, and the MEM indicator
disappears.
Repeat this procedure for all your
favorite radio stations.
MEMORY
MEM indicator
TUNING / PRESET
MEMORY
Selecting Preset Stations
1 Use the [BAND] button to select
FM or AM.
The band switches between FM and
AM each time you press the button.
2 Use the [KEY MODE] button to
select Preset mode (PRESET
indicator on).
The mode switches between Tuning
and Preset each time you press the but-
ton.
3 Use the TUNING/PRESET
[
]/[ ] buttons to select a pre-
set.
Press the Down [ ] button to select
the previous preset. Press the Up [ ]
button to select the next preset.
The number of the currently selected
preset is shown on the display.
STANDBY/ON
STANDBY
DISPLAY
ACCUCLOCK TUNING PRESET
KEY MODE TIMER
BAND TUNING / PRESET
FM MODE CLEAR MEMORY
KEY MODE
TUNING/PRESET
BAND
PRESET indicator
BAND
TUNING PRESET
KEY MODE
TUNING / PRESET
*En_T433_02.fm Page 17 Tuesday, February 15, 2005 3:09 PM